MOBIL28CTG Mobil 28 Grease, 13.4oz Tubes

Regular price $21.00

Shipping calculated at checkout.

MOBIL28CTG Mobil 28 Grease, 13.4oz Tubes

Trusted for more than 50 years

Mobilgrease 28 grease – the first synthetic product Mobil™ offered – has been trusted for more than 50 years. With a 10-year shelf life, it offers more than three times the life of similar-type competitive greases.
Mobilgrease 28 is the polyalphaolefin (PAO), clay-based multipurpose airframe and wheel bearing grease of choice for many aircraft operators around the world. It is designed to lubricate plain and rolling bearings at low to high speeds, and splines, screws, worm gears and other mechanisms where high-friction reduction, low-wear and low-lubricant friction losses are required.
It meets the performance requirements of key military and commercial aviation specifications and offers operators increased flexibility and potential inventory consolidation benefits. Mobilgrease 28 grease is fully approved for use in multipurpose airframe grease applications and in wheel bearings.

Common grease point applications

  • Gears, actuators, jack screws
  • Helicopter rotor bearings
  • General airframe (splines, slats, stabilizers, elevators)
  • Landing gear assemblies
  • Flight controls
  • Aircraft wheel bearings

Features and Benefits

A particular requirement of aviation greases is the need to resist high temperature stresses, while providing excellent starting and low torque at low-temperature. To meet this combination of needs ExxonMobil product formulation scientists chose synthetic hydrocarbon base oils for Mobilgrease 28 because of their low volatility, exceptional thermal/oxidative resistance, and superb low-temperature capability. Formulators chose specific thickener chemistry and a proprietary additive combination which helps maximize the benefits of the synthetic base oils.

Mobilgrease 28 meets the requirements of key military and commercial aviation specifications and has built up a superb reputation for performance and reliability among users around the world.

Mobilgrease 28 provides the following advantages and potential benefits:


Advantages and Potential Benefits

High viscosity index (VI) synthetic base stock with no wax content

Allows wide operating temperature range - outstanding high and low temperature performance

Provides thicker fluid films protecting against wear of equipment parts operating at high temperature

Causes low resistance during start-up at very low temperatures

Excellent protection against wear and corrosion

Superb bearing protection and helps extend bearing life and reduce bearing replacement costs

Extreme-pressure protection characteristics

Avoids excessive wear, even under shock load

High thermal/oxidative stability

Long relubrication intervals

High resistance to water washout

Maintains excellent grease performance in adverse weather and other water-exposure conditions



Mobilgrease 28 is designed for the lubrication of plain and rolling bearings at low to high speeds, and splines, screws, worm gears, and other mechanisms where high friction reduction, low wear, and low lubricant friction losses are required. The recommended operating temperature range is -54ºC to 177ºC (-65ºF to 350ºF) with appropriate relubrication intervals.

Mobilgrease 28 is recommended for use in landing wheel assemblies, control systems and actuators, screw jacks, servo devices, sealed-bearing motors, oscillating bearings, and helicopter rotor bearings on military and civil aircraft. Subject to equipment manufacturer approvals, it can also be used on naval shipboard auxiliary machinery and where superseded specifications MIL-G-81322 (WP), MIL-G-7711A, MIL-G-3545B, and MIL-G-25760A are recommended.

Mobilgrease 28 is also recommended for industrial lubrication, including sealed or repackable ball and roller bearings wherever extreme temperature conditions, high speeds, or water washing resistance are factors. Typical industrial applications include conveyor bearings, small alternator bearings operating at temperatures near 177ºC (350ºF), high-speed miniature ball bearings, and bearing applications where oscillatory motion, and vibration create problems.

Mobilgrease 28 is qualified by the U.S. Military under Specification MIL-PRF-81322, General-Purpose, Aircraft, and Specification DOD-G-24508A (Navy) for shipboard auxiliary machinery. It is a U.S. Military Symbol WTR and NATO Code Number G-395 grease.

Specifications and Approvals

This product has the following approvals:

NATO G-395



This product is recommended for use in applications requiring:



Properties and Specifications




NLGI 1.5

Base Oil Viscosity of Greases @ 100 C, mm2/s, AMS 1700


Base Oil Viscosity of Greases @ 40 C, mm2/s, AMS 1697


Bomb Oxidation, Pressure Drop, 100 h, kPa, ASTM D942


Color, Visual

Dark Red

Copper Strip Corrosion, 24 h, 100 C, Rating, ASTM D4048


Dirt, # particles 25u to 74 u, FTM 3005


Dirt, # particles 75u or larger, FTM 3005


Dropping Point, °C, ASTM D2265


Evaporation Loss, 22 h, 177 C, mass%, ASTM D2595


Falex Block on Ring Oscillating Wear Scar, 35k cycles, 90 deg angle, Al/bronze block, mm, ASTM D3704


Four-Ball Wear Test, Scar Diameter, mm, ASTM D2266


Load Carrying Capacity, Load-Wear Index, kgf, ASTM D2596


Low Temperature Torque, Running @ -54 C, 60 min, Nm, ASTM D1478


Low Temperature Torque, Starting @ -54 C, Nm, ASTM D1478


Lubrication Life @ 177 C, h, ASTM D3336


NBR-L, AMS 3217/2 Compat, 70C 158 h, vol %, FTM 3603


Oil Separation, 30 h @ 177 C, mass%, ASTM D6184


Oxidation Stability, Pressure Drop, 500 h, kPa, ASTM D942


Pen Worked X 100,000, 1/16" holes, 0.1 mm, FTM 313


Penetration, Worked, 60X, 0.1 mm, ASTM D217


Rust Protection, 48 h @ 125 F, Rating, ASTM D1743


Texture, VISUAL

Smooth, buttery

Thickener, wt%, AMS 1698


Water Washout, Loss @ 41 C, wt%, ASTM D1264(mod)